Tutorial - Upgrading the firmware of the N95 locked
Posted by Rodrigo Piccelli on April 4th, 2008
In recent days I was approached by e-mail and in person by a number of people, and charge me updates on the site (which I promise to return in full force), they want to update your N95 purchased by operators and therefore blocked.
First of all, according to new rules on mobile phones approved by the FCC, carriers are required to unlock your phone for free, however, not all things are as simple as there are terms in these rules that give the right to keep operating the handset if the cost has been subsidized (see Kikuti !?!?!?!). In any event many people have the right not being able to unlock then prepared a brief tutorial so that you can unlock your phone and keep up with firmware updates. We go to him:
TUTORIAL
The information contained in this tutorial is an intermediate level of complexity and, if performed incorrectly, can damage your unit. I only follow the instructions to follow if you have absolute certainty that you do and do so at your own risk, in no event can be held responsible if things do not occur as expected. Now come on ...
1) Install Nokia PC Suite or NSeries PC Suite, connect your phone via USB and make sure it's detected and working properly (PC Suite mode). Usually one of the software comes on CD-ROM that came with the phone but I recommend that you download the latest version, I personally prefer the NSeries PC Suite, but you decide. 
2) Download the following software:
3) Install the Nemesis Service Suite without changing any options and watch the end of the installation where it shows a brief tutorial explaining how to install a driver that is needed for its operation. Next:
- Open the program and click the "Scan for New Device" which is located in the upper right
- Click the "Phone Info"
- Click the "Read" and among other information, is displayed on the Product Code of your device
4) ATTENTION, This step is very important
At this point it switches the "Product Code" from its original apparatus blocked by an updatable. The following list provides the "Product Codes" work for the N95-1 (EURO) and N95-3 (NAM). Choose one according to the model of your device! For the record my phone is an N95-1 and I am using the Product Code 0546222. The list follows:
| N95-1 | N95-3 |
| # 0548763 # 0546222 # 0549028 | # 0552432 # 0552434 |
Question: What is the format of my machine?
Answer: The N95-1 is the protector of the camera lens, the N95-3 does not, according to the following photos:
| N95-1 | N95-3 |
 |  |
5) Enter the Product Code in the chosen space designated, check the checkbox "Enable" and click on "Write". There, the Product Code of your device has changed, you can check if everything was properly again by the "Read" will be displayed in the Product Code you just ask.
6) Both the Nokia PC Suite as the NSeries PC Suite has a feature to perform backup of data from your current machine, I suggest you do this now.
7) simply update the firmware of your device using Nokia Software Updater by following the onscreen instructions. Be sure the battery of your phone is FULLY Load (!) Before starting the process and by no means stop the USB connection during installation, it can perform this step in a notebook as a power outage can damage your unit to ever.
8) Ready! Your phone is updated and released break! But wait a little?!? Where are the contacts, calendar and settings? Yeah! Firmware update the format and the device is exactly why that was backed up. Simply restore it and this information will be devolta.
9) Reinstall your favorite applications.
10) Future updates of the firmware does not need this huge step-by-step, you can start from step 7.
That's it folks, I hope that this information is sufficient so that you can update your N95 quietly, no doubt leave a comment or send an e-mail reply that with all my heart. After this even deserve a lunch Kikuti? hehehehe
For more information about their rights and the release of equipment, visit the excellent No Lockout for sure all your questions will be resolved.
Keep visiting this site and spreading, the presence of each one of you is very important.
Abraços ... 
April 4th, 2008 at 21:04
Dude, great tutorial Rodrigo!
But the lunch is at the next when you deliver your project!
Works camel!
Brassu!
April 4th, 2008 at 22:04
Just a comment old ...
He upgraded the firmware to 11.2.009.
This is the last it?
April 7th, 2008 at 10:04
Yo man, I fzr a paddock here!
Update it soon!
April 12th, 2008 at 15:04
Hello, congratulations on good first tutorial, simple and complete.
I have a question for you, those products that you have codes for the n95-3 are en
If I change the cells of my pc and update it will still be en?
Valew
April 14th, 2008 at 13:04
Hello Gabriel,
The PC that I put is EN-US yes, you can use them smoothly.
Abraços ...
April 23rd, 2008 at 12:04
Rodrigo, good afternoon. First, congratulations on the site. Here we find many important information to use even more our N95.
My question is as follows. I do everything that the tutorial says, but after I install the Nemesis, but I'm in doubt. Not appearing on the screen informed the tutorial program to install the drive. You know what might be happening?
Now, thanks.
Paulo Carneiro
April 23rd, 2008 at 14:04
Good afternoon Paul,
This problem you are experiencing other people also faced, apparently after the upgrade to the Nokia Software Updater Nemesis crashes ...
From what I read, the solution is to uninstall all the software, install the nemesis and make the change the firmware and then install the software updater ...
Thanks for visiting and hope to have helped.
Abraços ...
April 25th, 2008 at 10:04
Good morning. What say what improvements the update of firmware for the N95-3 can bring? Hugs
May 2nd, 2008 at 13:05
q sure with this update the device is unlocked? axo q ... not all updates hj q I did not unlock the device and axo q pribncipalmente now they would not give this soft ... .. but the crowd q upgraded there could answer in this respect. ... especially the guys q is n95 -3 q is the clear and only has an update ....
May 2nd, 2008 at 13:05
and what were the changes .... for better and for worse ....
May 2nd, 2008 at 16:05
Mine is the N95-3 unlocked. Naturally, a firmware update does not unlock the device; software are different. I only update the firmware of my if, reportedly made relevant amendments, otherwise leave as is, because it is very good. As this model is newer than the N95-1, several problems were corrected, as the slide stronger, battery with more capacity, faster ... etc. ..
May 2nd, 2008 at 17:05
it is .... but the beginning of the post, was told that fw update after the phone was unlocked and I agree with you q update does not unlock. but my question is on the upgrade of fw 10.xxxx for 11.xxxxx the n95-3. pq read in some places there is no difference q and the gps will restart the qndo cell is activated. I would like to think of who have already upgraded whether it's worth, pq to find the version 10 very slow despite having a powerful processor ... ..
May 5th, 2008 at 17:05
Hello everyone ...
Collect information to mount this post on various sites on the Internet and everywhere was informed that the phone would be released, but in fact as some readers are saying, this did not happen. I did the test with the phone from a friend and do not accept the SIM card from another provider.
Anyway, the firmware update is always recommended as it fixes several flaws discovered after launch and in the case of subsidized units, some with the "personalization" that operators do and I particularly hate.
I am researching a little more about the process called "SIM Unlock", but this would allow the use of any SIM card and so I know more about it here in the public site.
I apologize to all the misunderstanding ...
May 28th, 2008 at 21:05
Finally came the new version of firmware - 20.2.011-for Nokia N95-3 or RM 160.
June 13th, 2008 at 10:06
Thank you, Rodrigo, the tutorial.
Confirming the part of the Driver of the NSS, it appears that more is not necessarily this step. Just ignored (because he did not ask for any insatlar hardware) and everything worked as planned.
I upgrade my N95-1 20.0.015 to 20.0.015. I think it was much quicker. Remarkable when you change the screen from vertical to horizontal position. It seems that a little more economic.
Tip: After the upgrade, it tries to reinstall all applications that are memory card, which led me to connect problems, slowness, and always a message that not install anything that is not specified. Was enough to reinstall everything I had on top of everything above to return to normal.
Another option would be to remove by force the memory card, connecting it via USB mode Data Transfer you can see everything that is within it.
June 16th, 2008 at 23:06
good guys, I saw the tutorial for help regarding my cel n95-1, I bought locked, as I n the note, paid to unlock, AEW decided to upgrade the blessed, AEW to my surprise he came to be blocked , and worse is the use q cel for my work, I am dual sim (adapter) someone has a solution for q n I die a dough? I heard about the software unlock xsim ... thank anyone who can help me!
August 10th, 2008 at 13:08
Rodrigo
Thanks for the Office, updated my firmware without problems.
Tkz
August 12th, 2008 at 14:08
Rodrigo, I bought a N95 Black, one of 8 Gb on ebay. London. I only sent the phone blocked. 'm Desperate because I can not debloquear, I tried those cards X, and nothing. Any tips?
August 16th, 2008 at 22:08
Emerson
Man, today I did not find any scheme SIM Unlock pro N95, but for a while I stopped to look, but in his place I took in an authorized dealer of Nokia, I think it is too expensive for them desbloquearem ...
Abraços ...
September 5th, 2008 at 16:09
Hello I forgot the password on the keyboard when I turn my device has a command of master reset or something???
September 15th, 2008 at 15:09
my firmware is 20.0.016, this is better than the 20.0.015, can I upgrade my cel (N95-1) to the 20.0.015 firmware?
Thanks
September 15th, 2008 at 20:09
Julio ...
Already launched the firmware V30.0.015, when you try to upgrade via NSU he will suggest this version.
Refresh is always recommended, because the new versions bring improvements and fixes.
Hugs
September 19th, 2008 at 17:09
Good afternoon everybody, I'm in the same class of RM-160 10.2.006 - original CLARO, and only began to worry about fw for my Lifeblog the unit, which one day to another, began to acknowledge error " can not access the database of Lifeblog. I understand that many people in various forums still complain that they can not upgrade. I wonder if it really works for the update v.11.2.009 only changing the Product Code, and if so, what would the PC used. I have that many people insecure, and also I am. I called the course and gave me two answers, 1) connects to the Nokia! 2) exchange for a new N95 ... So I bet the experience of staff who had success. Who can help me?
October 12th, 2008 at 12:10
Hello ....
I think I screwed up when trying to update the phone. Now appears on the screen just a message with the version 20.0.015 Nokia Local Mode. Is there a way to solve this problem? Can someone help me?
October 14th, 2008 at 11:10
This error I did not know Emerson, what happened?
Did something break in the process? Advise you to take up technical assistance.
Hugs
October 22nd, 2008 at 07:10
There is a possibility to reverse the change? I changed the Product Code, upgraded from V20 to V30, but noticed that the device presents some problems, such vibracal does not work sometimes has an error of running out of screen (all black, had to restart taking the battery). Await from you soon! Abraço!
October 22nd, 2008 at 07:10
Hello Christian, once updated there is no way to return to a previous version of Firmware.Tente update again but avoid backing up settings and applications, save only the contacts and the items Calendário.É an arduous task of reinstalling everything, but for my experience in the firmware update, unfortunately this is the best caminho.Abraços
October 31st, 2008 at 15:10
Galera ... Then follow the tips from our friend Rodrigo Piccelli but unfortunately I can not update the firmware, since it fell to 110, 4 MB and the time of insltalar it's a problem (fault), do not know why, and he thinks to update the entire time I ask to look for updates.
What can be?
Thank you!
November 1st, 2008 at 11:11
galera .... I did the whole procedure .. and was working ... i was put back up .. and now when I turn from a message, Gall in the boot of the phone. Please contact the retailer??
it was my unit ??????
fixable??
hug
November 3rd, 2008 at 08:11
Personal
I upgraded my N95-3 course for the R160 firmware v 20.2.011 on 31/10/2008. I had to change the product code to achieve, however, and see some good improvements, I noticed that the battery has to spend too fast, like 10 hours, but lasted on average 2 days. And tb noticed that the unit became very warm. Do not let any software loaded automatically and do not use any function of the device and even then these symptoms occurred.
Does anyone have any tips, I went through these problems?
Thank you very much.
November 3rd, 2008 at 18:11
# WillianNo Gravatar Says:
November 1st, 2008 at 11:11
galera .... I did the whole procedure .. and was working ... i was put back up .. and now when I turn from a message, Gall in the boot of the phone. Please contact the retailer??
it was my unit ??????
fixable??
hug
Man, does this on the phone, turns off and loads the 3 + green button (call) + *, now, with three keys pressed at the same time, connect the mobile and secure the 4 buttons ... probably the problem was resolved ...
November 5th, 2008 at 14:11
PLEASE!
Galera ... Then follow the tips from our friend Rodrigo Piccelli but unfortunately I can not update the firmware, since it fell to 110, 4 MB and the time to install of a problem (fault), do not know why, and he finds the time to update whole I ask to look for updates.
What can be?
Thank you!
November 12th, 2008 at 09:11
[...] Tutorial by Rodrigo Piccelli (http://www.rodrigopiccelli.com/?p=179) Português Translation (and some comments) by Raphael (DDL [...]
November 12th, 2008 at 23:11
E aew Rodrigo, tudo bom?
Glad you liked the translation. I translate it without asking, but then put credits would not think that problem, right?
Well, I forgot that it was code en-Xx ~
I found some on the Internet, if you want to add your text.
N95-3 (NAM) Product Codes:
* # 0534861: NAM / US
* # 0552415: NAM / US
* # 0551733: NAM / LTA
* # 0551734: NAM / LTA
* # 0552432: NAM / Brazil
* # 0552434: NAM / Brazil
N95 Product Codes by region:
Europe
0534841 EURO1 - Sand
0534842 FRANCE
0534843 ALPS
0534844 EURO2
0534845 TURKEY
0534847 SCANDINAVIA
0534848 BALTIAN
RUSSIAN 0534849
0534850 UKRAINE
0534851 CIS, Bulgaria
0534852 EURO3
0534853 BALKANS
0534854 GREECE, CYPROS
0534857 ISRAEL
0536058 BELARUS / MOLDOVA
0534833 SINGAPORE
0536062 EURO1 - Plum
0536063 FRANCE
0536064 ALPS
0536065 EURO2
0536066 TURKEY
0536068 SCANDINAVIA
0536069 BALTIAN
RUSSIAN 0536070
0536071 UKRAINE
0536072 CIS, Bulgaria
0536073 BELARUS / MOLDOVA
0536074 EURO3
0536075 BALKANS
0536076 GREECE, CYPROS
0536079 ISRAEL
Asia
0534832: Hong Kong
0536084: Hong Kong
0534830: Taiwan
0536083: Taiwan
0534833: Apac 1
0536085: Apac 1
0534834: Philippines
0534835: Australia
0534836: New Zeland
0534837: Indonesia
0536086: Philippines
0536087: Australia
0536088: New Zeland
0536089: Indonesia
0548298: India Apac 2
0548299: India Apac 2
0535053: Thailand
0536093: Thailand
0534839: Vietnam
0536091: Vietnam
Operator Specific codes
0548170 - Orange UK
0548020 - Movistar
Nokia N95 8GB Product Codes:
* # 0550348: FRANCE
* # 0550352: ALPS
* # 0549487: EURO 1
* # 0550359: EURO2
* # 0550370: TURKEY
* # 0550372: SCANDINAVIA
* # 0550373: BALTIAN
* # 0550798: RUSSIAN
* # 0550799: UKRAINE
* # 0550800: BELARUS / MOLDOVA
* # 0550375: CIS, Bulgaria
* # 0550378: EURO3
* # 0550379: BALKANS
* # 0550801: GREECE, CYPROS
* # 0550802: ISRAEL
* # 0555180: SINGAPORE
* # 0555181: MALAYSIA
* # 0555187: EMERGING ASIA
* # 0550455: INDONESIA
* # 0550454: New Zeland
* # 0550453: AUSTRALIA
* # 0550459: THAILAND
* # 0550457: VIETNAM
All I found in http://thenokiablog.com
Abração
November 18th, 2008 at 21:11
Well, did the above procedures, it worked to do. my n95-3 RM 160 upgraded to:
V 20.2.011
13-05-08
RM-160
NOKIA N95 (24.01)
restored the backp and everything went well,
worth peel tips hugs.
November 21st, 2008 at 23:11
to desperate
I bought the n-95 and upgraded to version 30.0015
but .. there mtos bugs in the phone .. such as light
q keyboard does not light ..
QI do go back to the original?
November 26th, 2008 at 19:11
CpBaIxO Says:
November 3rd, 2008 at 18:11
# WillianNo Gravatar Says:
November 1st, 2008 at 11:11
galera .... I did the whole procedure .. and was working ... i was put back up .. and now when I turn from a message, Gall in the boot of the phone. Please contact the retailer??
it was my unit ??????
fixable??
hug
Man, does this on the phone, turns off and loads the 3 + green button (call) + *, now, with three keys pressed at the same time, connect the mobile and secure the 4 buttons ... probably the problem was resolved ...
CpBaIxO! there is this guy worked for me in good
December 11th, 2008 at 16:12
Hello friends!
Okay? There are times that try the Product Code of the E71 ... I can not find many people wanting to re tb! We need this information to make the update of the device ...
WE NEED YOUR HELP!
thanks,
Peter.
December 11th, 2008 at 23:12
Ah Product code E71 pro Brazil ... With cedilla and accents ... There are several huge lists of codes for various countries and not to appear or for Latin America ... What will pro ... Brazil.
December 17th, 2008 at 00:12
RODRIGO PICCELLI Caro.
INSTALL THE PROGRAM VC suggested for MODANÇA CODE 0549028 USEI The COD, and even then only managed a Freware UPDATE FOR V21, 0.016, HOW DO I can THE MOST RECENT ME A TIP please.
You for your attention THANK FROM JA.
ALEXANDRE MANSANI
December 18th, 2008 at 16:12
Hello Alexandre
Probably the last version available for this product code you are using is the V21.0.026
The product code is 0546222 for sure have version V30.0.015 it is what I'm using.
Abraços ...
December 30th, 2008 at 00:12
If you can not find a firmware, we have the solution: http://www.firmware.com.br, and ask if anyone has the answer, you receive a notice by e-mail.
January 2nd, 2009 at 07:01
Good morning friends!
RS and I'm interested in buying a n95 in Mercader Free, but want one with the lowest price in mind, then I see that there are various devices N95-1 (European).
If I do as your tutorial for firmware upgrade, I can turn a N95-1 N95-3 (American) to work in the frequency of 850 MHz, for I am of course 3G customer and it only operates in full here in my city?
Or is there another way?
I look back.
Abraços!
Fernando Vieira
January 7th, 2009 at 00:01
All congratulations to the tutorial!
Did all procedure and so far everything is working perfectly.
Just not yet tested if it will work for other operators.
Abração!
January 15th, 2009 at 22:01
Rodrigo
When do the procedure to install the USB drive, Windows reports that there is no information for the selected hardware. Ask. Is there any problem in relation to XP? The tutorial site apparently is the Nemesis Vista. You tested with XP? Short. I'm not able to install the USB drive. Grateful
January 16th, 2009 at 14:01
Show your ball tutorial man! Very well explained!
January 24th, 2009 at 13:01
Rodrigo Piccelli Hello, is this guy do everything right except that when I pull up that says my backup is pt_br and my cel is us, how do I face?
February 17th, 2009 at 10:02
I upgraded and had no problems. I did several tests and everything worked without bugs. Vladimir@bcc.ufla.br
April 8th, 2009 at 13:04
Rodrigo made as described but by the time installing the driver I get a message there that it is not compatible as you describe ai step by step because of the problem, if you have skype and how to pass, grateful.
May 7th, 2009 at 17:05
rodrigo tried to update my n95-3pelo nsu has a bug in the update. the phone is dead in a black screen and the keyboard does not work and does not connect the USB cable to do thanks ...
June 23rd, 2009 at 13:06
look my brother bought a n95
so that now he is blacklisted
is how to unlock it.
July 2nd, 2009 at 21:07
GALERA, FIZ A BESTEIRA TO UPDATE MY N95 AND NOW HE IS ASKING ME PASSWORD MEMORY CARD. NEVER PUT ANY PASSWORD WITH CARD AND NOW I CAN NOT ACCESS MY AGENDA TELEPHONE MESSAGES AND PHOTOS THAT USE AT WORK.
If anyone can help me thank, deejaybetoloko@gmail.com
August 1st, 2009 at 18:08
[...] Updating the firmware of the N95 locked. [...]
August 1st, 2009 at 19:08
good night to all this blogging, looks was doing update nokia n96 16gb, I won a gift from England via pc suite and when I finished installing a message appeared saying the following in the startup-failure of the device and look for asistencia, I did everything I found in blogs and Leita, but nothing so far it's been 17 days that I am one hundred porda use the nokia n96, so peopl help if anybody know how to solve this cucumber is not I will get lost this phone, I hope to send some e-mail telling me what to do ok.
August 5th, 2009 at 12:08
you conoce the latest version of firmware pra n95-3? thank you ALL.
August 6th, 2009 at 13:08
Hello, great blog, but I think squeceu to put PC's in your N95-2.
August 7th, 2009 at 16:08
NO NEED FOR PASSWORD OR CODE SIM CARD, JUST CLICK ON THE SIDE OF THIS CAIXINHA PHRASE almost invisible to confirm the update of the N95 SOFTWARE 30.0.015
September 6th, 2009 at 00:09
Not able to upgrade from version to version 21.0.16 but new pq
September 6th, 2009 at 00:09
rodrigo ta atualizano not say that for a conectividaotima cable
NEED Should this usb connected directly to the PC and not through a USB hub or keyboard USB docking station for a laptop I do not help me to entendeno
September 9th, 2009 at 15:09
hi i have a nokia n95-3 RM160 how do I update it in version 21.0.16? is possible? And in version 30.01? Grateful for the attention!
September 11th, 2009 at 18:09
I upgraded my nokia n95-3 but like the PC changed service providers oque do? grateful for the attention
September 15th, 2009 at 00:09
Goodnight friends
I upgraded the firmware with the Nokia Update and is not running certain programs. Another thing is that it leaves no more I reinstall the same applications. What can I do to correct it.?
Obg
September 15th, 2009 at 00:09
My phone is an N95-1 and the firmware has been updated to see 30
October 5th, 2009 at 19:10
hi rodrigo I did the procedure td certinho.apareceu the new upgrade, i do the upgrade installed td bem, ai qdo I was restored to qo memory cell will restart until i tdb more qdo restart it appears a message like this in the boot failure .. phone. Please contact the retailer .. oq sera q happened? Me ajuda ai!
Abrass
October 29th, 2009 at 12:10
rodrigo Picelli hello, I have a n95-3 and I'm not consigui into the wireless internet I bought it is reset to 2 days, I qando axo networks connected to it but ta ai fala q nao tem response gateway, how do I help? ?
and is safe esa firmware update afraid d spoil the device?
December 18th, 2009 at 10:12
Hello to friends and Un little problem on my Nokia 6120, installed the version 5.11, while lacking conpleto 43 seconds to install, it gave the error, follow the vairios pasos and could not get it to reconnect, disconnect all the case, connect the USB cable, put the switch on the battery charger, and enter the pc no longer connect the cel. cel and the time to restart it vibrates as normal, a screen appears blank en q lasts 30 seconds and then off again, q fasso please help me ..
January 19th, 2010 at 17:01
q ends after the installation of the NSS does not appear that the tutorial screen that says you have to appear!
January 29th, 2010 at 17:01
Hello ... ..
I managed to resurrect my N95 8gb ... was giving white screen, try * +3 + start + power and nothing ...
I did the following, uninstalled all programs installed on your pc nokia ... I called the phone (white screen) and the pc recognized the phone but with another name (nokia bbs. ... I do not remember the name recognized ... q) disconnected the phone and reinstalled nokia update ... I called back the phone cable and started the nokia update, follow the steps to update the firmware ... the 1st attempt went wrong .... I started again, then took + / - 2 hours (power cord attached) then I could upgrade pummm ... to version 30.0.018 (Portuguese-Protugal) the phone back to work ... .. q susto !!!!!